3D Printer Polyjet Material | Marubeni Information Systems

Polyjet Photopolymers

Materials	Rigid Opaque	Rigid Opaque	Multi-Colored Materials Rigid Opaque	Transparent	Translucent	Simulated Polypropylene
	VeroWhitePlus VeroBlackPlus VeroGray	VeroBlue	VeroCyan VeroMagenta VeroYellow	VeroClear	RGD720	Rigur

Available Colors	White,Black,Gray	Blue	Cyan,Magenta,Yellow	Transparent	Yellow Translucent	Ivory
Tensile Strength	65MPa	60MPa	65MPa	65MPa	65MPa	45MPa
Flexural Strength	110MPa	70MPa	110MPa	110MPa	110MPa	59MPa
Heat Distortion Temperature (0.45MPa)	50℃	50℃	50℃	50℃	50℃	54℃
Heat Distortion Temperature (1.82MPa)	50℃	50℃	50℃	50℃	50℃	50℃
Izod Notched Impact	30J/m	30J/m	30J/m	30J/m	30J/m	35J/m
Shore Hardness	Scale D86	Scale D86	Scale D86	Scale D86	Scale D86	Scale D84
Tensile Tear Resistance	-	-	-	-	-	-
Compressive Set	-	-	-	-	-	-
System Availability	・Objet24_※2 ・Objet30 Pro ・Objet30 Prime ・Eden260S_※3 ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750 ・Objet1000 Plus	・Objet30 Pro ・Objet30 Prime ・Eden260S ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750 ・Objet1000 Plus	・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750	・Objet30 Pro ・Objet30 Prime ・Eden260S ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750 ・Objet1000 Plus	・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3	・Objet30 Pro ・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Objet1000 Plus

Materials	High Temperature	Simulate Standard ABS Plastics	Rubber-like Materials					Biocompatible Materials_※4
	RGD525	Digital ABS	TangoGray	TangoBlack	TangoBlackPlus	TangoPlus	Agilus 30	MED610

Available Colors	White	Ivoy,Green_※1	Gray	Black	Black	Translucent	Translucent Black	Transparent
Tensile Strength	80MPa	60MPa	5MPa	2.4MPa	1.5MPa		3.1MPa	65MPa
Flexural Strength	130MPa	75MPa	―	―	―			110MPa
Heat Distortion Temperature (0.45MPa)	67℃ ※After thermal post treatment procedure：80℃	68℃ After thermal post treatment procedure：95℃	―	―	―			50℃
Heat Distortion Temperature (1.82MPa)	57℃	55℃	―	―	―			50℃
Izod Notched Impact	16J/m	115J/m	－	―	―			30J/m
Shore Hardness	Scale D88	Scale D87	Scale A77	Scale A62	Scale A28		Scale A35	Scale D86
Tensile Tear Resistance	―	―	12kg/cm	5kg/cm	4kg/cm		7kg/cm	―
Compressive Set	―	―	1.5%	1.5%	5.0%		7%	―
System Availability	・Objet30 Pro ・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3	・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750 ・Objet1000 Plus	・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Objet1000 Plus	・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Objet1000 Plus	・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3 ・Stratasys J750 ・Objet1000 Plus	・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3	・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3	・Objet30 Prime ・Eden260VS ・Objet260 Connex3 ・Objet350 Connex3 ・Objet500 Connex3

■Connex3 Systems & Objet1000 Plus：Combining materials, can express over 1,000 materials with composite material.
■ Stratasys J750：Combining up to six materials, can express more than 360,000 colors with composite material.

※1 Digital ABS Ivory is fabricated by Polyjet Technology combining RGD515 and RGD531. Digital ABS Green is fabricated by Polyjet Technology combining RGD515 and RGD535.
※2　Only VeroWhitePlus material available
※3　VeroBlackPlus material is not available
※4　Standard DIN EN ISO 10993-1,USP plastic class VI Certified
＊All other trademarks are the property of their respective owners, and Stratasys assumes no responsibility with regard to the selection, performance, or use of these non-Stratasys products. Product specifications subject to change without notice.